Ergonomic Seat Edging

This product has two major advantages on your boat. Firstly its ergonimic desigh locks your bottom into your cockpit seats, or seats down below. Secondly, it is a huge safety feature as it removes any sharp edges on your boat in case of an accident in rough seas for example. 

Each piece is 100mm long, has a 70mm horzontal depth, 50mm on the vertical, and joined by 8mm dowels(supplied) for a very good reason. As you join and place the edging, it will follow the curves on your boat.

Once glued in place, a single 400gsm biaxial 100mm tape is all that is required to fibre glass it to your boat.  Adding this composite curve and then adding fiberglass will also increase the overall stength on the seat edge. Pieces are simply cut for the angles required for tighter turns such as right angles.

It also offers a far supirior asthetic with its flat sweeping curve and lifts the finish on any boat buid.