Modular Storage - Digital
If you have your own 3D Printer, then why not print your own!
Print this one on its side with 10% infill or above. Remember that the final strength of this component is acheived via a light layer of fiberglass, so infill setings can be kept relitivley low to keep the weight down. Print as many as you like!
This storage unit is infinatley expandable. In the image shown we are using 6 of these modules to span the port cabin bulkhead. Pictures also show it paired and perendicular with the 3D Boat Builders Utility Storage Unit.
This module is 250mm (L) x 200mm (W) x 170mm (D). Joining four of these together makes the Meter.
Like our edging products each module is losley joined using 8mm dowels. Keeping the front face perfectly alighned, the rear of the modules tends to follow the natural curve of the boat as seen in the photographs. Filler and then a light coating of fibreglass completes this storage system making a very strong usable storage solution.
We also include 1 end cam or divider with evey storage module.
One of the advantages of 3D printing is scalability. If you are after different size please contact us.
Have a look at our utilty storage module as it is set to complement this storage system.